Avaya CS700 Administration And Maintenance page 88

Configuring Channels and Call Routing
Table 15: Call Branding Configuration Parameters
Parameter
dnis
rg
msg
ps
cp
88 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
Description
Specifies the digit pattern (DNIS).
The field width (from 1 to 16 digits) is specified by the Digit Parameters
option. The ? character is a wildcard that automatically matches any digit 0
through 9. For example, an entry of 123? in the table matches any value from
1230 to 1239.
The default is blank.
Reservation Group. Specifies the reservation group by number. Onethousand
reservation groups are supported (0-999). See
page 92
This required entry specifies the annunciator message that plays before the
system executes the action specified by the Function parameter.
The default is 0, which means that no message is played.
See Managing Annunciator Text
Routing Configuration menu's Flexible Annunciator Messages option.
This required entry specifies the prompt set number used to play annunciator
messages. Must be a number from 0 to 20.
0 — the system play the standard message set until the participant
l
enters a passcode, then the system uses the conference's prompt set.
1— the system uses the default prompt set.
l
Use conference prompt set (y/n). Some annunciator messages play only to
the participant who initiated a DTMF command. This field determines if the
caller will hear the message in the language assigned to the conference or
the language assigned to the caller via cbutil <ps>.
Using Reservation Groups
on page 112 for information about the Call
on
1 of 2