Avaya CS700 Administration And Maintenance page 375

Table 12: Hardware and Device Messages (continued)
Message Code
4112
4113
4114
4115
4116
4117
4118
Message
DPM corrupted
DSP node %d - not running
DSP node %d - not
responding to test
DSP node %d test:
Undefined response: 0x%d
DSP Board %d cannot set
MVIP reference memory
DSP Board %d fails MVIP
RX/TX ping pong test
DSP node %d - minimum
MVIP RX/TX frame count
%d, got %d & %d
Log Message Codes
Meaning
A process has detected
that one of the circular
buffers maintained in
dual-port memory was
corrupted. The command
process or the init process
found a problem with the
head of the remove-talker
buffer, or the event process
found a problem with the
head of the event buffer.
During DSP testing, the
specified DSP was not
started as desired.
The downloaded DSP test
code does not respond for
the specified test.
The downloaded DSP test
code gave an undefined
response to the specified
test.
An attempt to write the
reference memory for the
specified DSP board via
the dual-port memory
defining DSo time slots for
use by the transmit PLD on
the MVIP bus failed.
The specified MVIP control
test failed for the specified
DSP board.
The specified DSP failed
the MVIP frame count test.
The received counts should
have been at least as much
as the specified amount
and be different by no more
than one.
Issue 1 August 2007
5 of 8
375