Status Leds - Avaya CS700 Administration And Maintenance

Figure 9: CS700/CS780 Dual System RAID Configuration
Contact Customer Support for information on RAID system installation and configuration
options.
!
CAUTION:
When powering up the system, the RAID drive must be powered up either before
CAUTION:
the bridge or at the same time. The bridge will not operate and serious damage
could result if the bridge is powered up with the RAID enclosure off.

Status LEDs

Figure 10 and Figure 11
supply LEDs.
Backplane Segment A
1 2 3 4 5
Redundant Disk Array Hot Standby
Floppy Disk
Drive
RAID Controller
Module Interface
show and describe system CPUs, NIC interface, DSP, and power
Backplane Segment B
6 7 8 9 10 11 12
Redundant Disk Array Hot Standby
Floppy Disk
Drive
RAID Controller
Module Interface
Hardware Features
Issue 1 August 2007 41