T3config.txt, board configuration example
T3 Status Utility, t3stat
The T3 status utility helps you to monitor the status of the T3 board and to debug problems. The
utility is stored in /usr/dcb/bin and requires that you sign on with dcbguest privileges.
Start the utility by typing this command at the command line:
t3stat
The system displays one screen for each installed T3 board.
Tip:
Press the Spacebar to display the T3 status for another board.
Tip:
<Board 1>
RECEIVE_EQUALIZER=0
LINE_BUILDOUT=0
CHASIS_SLOT=14
CLOCK_SOURCE=Internal
CLOCK_DRIVER=C8A
CLOCK_DRIVER_SOURCE=Internal
IP_ADDRESS=10.221.11.10
TRUNKS=1-2:2 4-28:2
TRUNKS=3:3
CALLING=1-9:1 10-19:2 20-28:3
<Board 2>
RECEIVE_EQUALIZER=0
LINE_BUILDOUT=0
CHASIS_SLOT=13
CLOCK_SOURCE=C8A
CLOCK_DRIVER=None
CLOCK_DRIVER_SOURCE=None
IP_ADDRESS=10.221.11.12
TRUNKS=1-28:2
CALLING=1-28:3
<Board 3>
RECEIVE_EQUALIZER=0
LINE_BUILDOUT=0
CHASIS_SLOT=12
CLOCK_SOURCE=C8A
CLOCK_DRIVER=None
CLOCK_DRIVER_SOURCE=None
IP_ADDRESS=10.221.11.13
TRUNKS=1-28:2
Configuring T3
Issue 1 August 2007
155