Blast Dial Parameters - Avaya CS700 Administration And Maintenance

To change the date or time or both:
1. Select System Administrator Main > System Date/Time.
The system displays the
System Date/Time
When conferences are active, the system displays this warning message.
System Date/Time Warning
+-------------------------Warning-----------------------+
¦ Conferences are active! Changing the Date/Time will
¦ affect CDRs and timers. It is highly recommended that ¦
¦ you wait until all conference activity has stopped
+-------------------------------------------------------+
2. Enter a date or time or both in the format shown.
3. Save (or cancel) your changes.
4. Re-initialize the system to put the time change into effect.

Blast Dial Parameters

The Blast Dial Configuration option enables you to specify how the system processes blast dial
calls. In a blast dial, the system simultaneously dials an entire list of phone numbers to establish
a conference. When conferees answer the call, the system prompts them to press specific digits
on their telephones to join the conference without operator assistance.
System Date/Time.
+-------System Date/Time--------+
¦
¦ Date (mm/dd/yyyy): 03/16/2006 ¦
¦ Time (hh:mm)
+--------- ESC to Exit ---------+
Blast Dial Parameters
¦
: 07:28 ¦
¦
Issue 1 August 2007 69