Avaya CS700 Administration And Maintenance page 70

Configuring System-Wide Settings
To configure blast dial parameters:
1. Select System Administrator Main > Configurations > Blast Dial Configuration.
The system displays
Blast Dial Configuration
2. Specify the parameters you want.
3. Save (or cancel) your changes.
Table 10: Blast Dial Parameters
Parameter
Max. Channel Blast
Blast Delay
Invalid Code
70 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
Blast Dial Configuration.
+------Blast Dial Configuration-------+
¦
¦ Max. Channel Blast (1-16): 5
¦ Blast Delay (0-60)
¦ Invalid Code
¦ Scan Time (5-20)
¦ CLPG Timeout (0,30-600)
+------------ ESC to Exit ------------+
Table 10
Description
The number of channels (1 to 16) the system simultaneously
dials during a blast dial. The default is 8 channels.
Dialing channels in groups with a short pause between each
group prevents flooding the network with calls. (The Blast
Delay parameter specifies the pause between blast dials.)
The number of seconds (0 to 60) the system pauses before
dialing the next group of channels in a blast dial.
The default is 2 seconds.
1
The system response to conferees who enter an invalid
access code or conferees who do not enter the digits within
the time allowed. (The Scan Time parameter specifies the
allowed time.)
ENTER (default) — The conferee is placed in the
l
Enter Conference to wait for operator assistance.
Hang-up — The system disconnects the caller.
l
Note: The Invalid Code setting also specifies the system
response to conferees entering codes for Secured blast
conferences.
: 0
: HANG-UP
: 20
: 0
lists and describes blast dial parameters.
¦
¦
¦
¦
¦
¦
1 of 2