Configuring Channels and Call Routing
Modifying Call Branding Entries
Use the cbutil update command to update an existing entry in the Call Branding table.
update <dnis> [-m <msg> -g <rg> -p <ps> -u <ucps> -f <func> -l <ln>
-c <cn>]
where:
<dnis>
-m <msg>
-g <rg>
-p <ps>
-u <cp>
-f <func>
-l <"ln">
-c <"cn">
Table 19: Call Branding Configuration Parameters
Tip:
The entry is not changed when you only specify
Tip:
Deleting Call Branding Entries
To delete Call Branding table entries use cbutil remove command to remove the entry from the
Call Branding table.
cbutil remove <"dnis">
where:
dnis
<"
">
Listing the Entries in the Call Branding Table
You can display a single entry or all entries in the call branding table.
90 Administration and Maintenance of the S6200/S6800 Servers
DNIS
New annunciator message number
New Reservation Group
New Prompt Set number (0-20)
New Use Conference Prompt Set (y/n)
New Function: DIRECT/SCAN/ENTER/HANGUP/AUTOVL/FLEX
New line name to associate with caller (optional)
New company name to associate with caller (optional)
is the DNIS for entry to remove.
on page 87 describes each parameter.
.
dnis
<"
">