Configuring Network Settings - Avaya CS700 Administration And Maintenance

System Maintenance Options
Clearing Network Statistics
l
statistics files generated by the system.
System Re-Initialization
l
from the management interface.

Configuring Network Settings

The system may be configured to support the following mixed-mode conferences:
T1 and T3
l
E1 and T3
l
The Network Configuration option enables you to configure the signaling protocol for the
system's telecommunication trunks, threshold parameters for both major and minor alarm
conditions detected on channel interfaces, the system board count, and port groups.
Trunk settings for your system are configured during system installation based on the resources
available from the installation site. If you believe that these settings need to be modified, consult
your network provider and customer support before making any changes.
To view or configure network interface parameters:
1. Select System Maintenance Main > Network Configuration.
The system displays the
use to change or view trunk configuration settings. The menu varies depending on your
network installation.
Network Configuration Menu
130 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
on page 165 describes how to clear network event and error
on page 166 describes how to reboot and shut down the system
Network Configuration
+---- Network Configuration ----+
¦
¦ Trunk (T1/E1) Configuration
¦ Trunk Status
¦ Trunk Enable/Disable
¦ Load Outbound Port Group Cfg ¦
¦ Load Inbound Port Group Cfg
¦ MAIN MENU
+-------------------------------+
Menu. This menu contains options you can
¦
¦
¦
¦
¦
¦