Configuring Channels and Call Routing
Setting Up Flex Call Routing
The following sections describe how to associate the Flex call routing with DNIS or DDI digits so
the system can process Flex-specific dial-in calls.
Note:
Do not use the same numbers for DNIS Direct and Flex conferee passcodes.
Note:
DNIS Direct does not support Flex conferences.
To set up Flex Call Routing, the following settings must be activated:
1. Set On Demand in Administrator Menu > Configure Scheduler to percentage greater than 0.
Flex flow calls use On Demand ports
2. Add a DNIS to cbutil with a function of FLEX.
Calls dialing in with these DNIS digits will be processed according to the Flex call flow.
94 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server