Avaya CS700 Administration And Maintenance page 337

recipient object is inform(2), then it will transmit Inform PDUs to the target recipient
(Network Management Station).
Each notification type defined has a label that is used in subsequent definitions
(described below) - in this case, they are called "31" and "32", but can be any text
string.
###############################################################################
#Entry type: snmpNotifyEntry
#Format: snmpNotifyName
# snmpNotifyTag
# snmpNotifyType
# snmpNotifyStorageType
snmpNotifyEntry 31 Console trap nonVolatile
snmpNotifyEntry 32 InformSink inform nonVolatile
Example: Create a notification label, "trapLabel" for traps (SNMP v1 and v2c clients).
snmpNotifyEntry 31 trapLabel trap nonVolatile
Example: Create a notification label, "informLabel" for informs (SNMP v2c clients).
snmpNotifyEntry 32 informLabel inform nonVolatile
###################################################################
SNMP Target Definitions - Specifies multiple trap destinations, and whether the trap
destination needs a v2 protocol or v1 protocol format packet via the
snmpTargetAddrParams as described below. Sample is a V2c packet format destination,
using a trap notification format message (that is, type 31, as described in Top level
Notification Definition.
Example: Setup trap recipient 192.168.17.55 using the v2c protocol format.
snmpTargetAddrEntry
v2cExampleParams nonVolatile 255.255.255.255:0 2048b
Example: Setup trap recipient 192.168.17.55 using the version 1 protocol format.
snmpTargetAddrEntry
v1ExampleParams nonVolatile 255.255.255.255:0 2048b
The :0 portion appended to the destination address in the above examples indicates the
destination port for traps/informs, the default port 162.
###############################################################################
#Entry type: snmpTargetAddrEntry
#Format: snmpTargetAddrName
# snmpTargetAddrTDomain
# snmpTargetAddrTAddress
# snmpTargetAddrTimeout
# snmpTargetAddrRetryCount
# snmpTargetAddrTagList
# snmpTargetAddrParams
# snmpTargetAddrStorageType
# snmpTargetAddrTMask
# snmpTargetAddrMMS
snmpTargetAddrEntry
v2cExampleParams nonVolatile 255.255.255.255:0 2048b
###################################################################
Trap/Notification Target Parameters - Specifies protocol format and authentication
requirements.
###################################################################
#Entry type: snmpTargetParamsEntry
#Format: snmpTargetParamsName
# snmpTargetParamsMPModel
# snmpTargetParamsSecurityModel
# snmpTargetParamsSecurityName
(text)
(text)
(trap(1), inform(2))
(nonVolatile, permanent, readOnly)
TargetHost1 snmpUDPDomain 192.168.17.55:0 100 3\ Console
TargetHost2 snmpUDPDomain 192.168.17.55:0 100 3\ Console
(text)
(snmpUDPDomain)
(transport address, i.e., 192.147.142.254:0)
(integer)
(integer in seconds)
(text)
(text)
(nonVolatile)
(transport mask, i.e., 255.255.255.255:0)
(integer)
TargetHost1 snmpUDPDomain 192.168.12.234:0 100 3 Console\
(text)
(integer)
(text)
Configuring the Master Agent Configuration File
(snmpv1, snmpv2c, snmpv2s, usm)
Issue 1 August 2007 337