Avaya CS700 Administration And Maintenance page 184

Configuring Conference Scheduler
Managing Leader PINs on systems configured for Flex
When queriing the EPV server for the passcode from a system configured for the Flex call flow,
the EPV server can return a value identifying the status of the Leader PIN for the conference.
The status can be: valid, expired, or expiring. When the system returns the "expired" or
"expiring" statuses, it plays a prompt requesting that the Leader PIN be updated. The following
table describes the fields and settings related to Leader PIN expiration statuses.
Field
leaderPinStatus
lpMin
lpMax
This excerpt from _an XML response shows the Leader PIN settings for an expired PIN code. In
this example, the new Leader PIN is set to "777." This three-digit string meets the requirement
established by the minimum length (lpMin) and maximum length (lpMax) settings.
EPV HTML Command
The CS700/CS780 Conferencing Server can send commands to the EPV server to update
conference schedule data. The cmdURI parameter in the xmldatasource section of the /usr/
dcb/dbase/admin/chdbased.reg file defines the URI where EPV commands are sent.
184 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
type
Integer
Integer
Integer
<leaderPin>777</leaderPin>
<leaderPinStatus>0</leaderPinStatus>
<lpMin>3</lpMin>
<lpMax>7</lpMax>
Description
The expiration status of the Leader PIN for a vFlow
conference. Where,
-1 (Valid) The Leader PIN is valid and is not set
to expire within the next 15 days. The system
does not play a warning regarding pending
expiration. (default)
0 (Expired) The Leader PIN has expired.
The system prompts the user, "This Leader
PIN has expired and must be changed."
1-15 (Expiring) The Leader PIN will expire in this
number of days.
The system prompts the user, "This Leader
PIN is set to expire in <number> of days.
Press 1 to change or star (*) to defer."
Minimum string length for a new Leader PIN.
0 - 16, or the maximum value allowed by the system
configuration.
The default entry, 0 ,causes the system to user the
system-wide setting.
Maximum string length for a new Leader PIN.
0 - 16, or the maximum value allowed by the system
configuration.
The default entry, 0 ,causes the system to use the
system-wide setting