System Maintenance Options
T3 Trunk Enable
On T3 systems you can select the T3 Trunk Enable option from the Network Configuration
menu to display the
individual trunks on the t3transport.
T3 Maintenance Mode
Load the Outbound Port Group Configuration
During system start up, the Outbound Port Group configuration file is parsed, validated, and
loaded into shared memory. Any validation error is logged on the system and stored in usr/dcb/
logs.
For configuration information for the OPG file see
Note:
When the configuration file is missing or there is no valid port group, the system
Note:
uses the default port group names "default." This port group searches all ports in
ascending order.
Administrators may also load the file into shared memory on a live system by selecting the Load
Outbound Port Group Configuration option on the Network Configuration menu.
146 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
T3 Maintenance Mode
+--T3 Maintenance Mode---+
¦
¦
¦ 1: Enable
¦ 2: Enable
¦ 3: Enable
¦ 4: Enable
¦ 5: Enable
¦ 6: Enable
¦ 7: Enable
¦ 8: Enable
¦ 9: Enable
¦10: Enable
¦11: Enable
¦12: Enable
¦13: Enable
¦14: Enable
+----- ESC to Exit ------+
settings Use this screen to enable or disable
¦
¦
15: Enable
¦
16: Enable
¦
17: Enable
¦
18: Enable
¦
19: Enable
¦
20: Enable
¦
21: Enable
¦
22: Enable
¦
23: Enable
¦
24: Enable
¦
25: Enable
¦
26: Enable
¦
27: Enable
¦
28: Enable
¦
Outbound Port Groups (OPG)
on page 82.