Managing Reports
Auto CDR Process Flow
This section summarizes the process of requesting and sending records between the Auto CDR
server and the remote host.
Table 56: Auto CDR Server Action and Remote Host Response
Auto CDR Server...
Initializes (warm/cold boot).
Listens for connection requests.
Verifies host in /etc/hosts file.
Establishes connection.
Request Autocdr Mode flag = N
Locates/transfers requested file.
Reaches end of file.
Sends blank record (seqnum=99999,
Data Valid flag = N)
Waits for next command.
Request Autocdr Mode flag = Y
Locates/transfers requested file.
Stops listening for commands.
Continues sending records as events
occur.
Loses/closes connection.
Stops sending records.
Listens for connection requests.
The system must be in a LAN environment and the system configuration Automatic CDR
l
Print parameter set to LAN.
Records are sent in Auto CDR export format prefixed with header information.
l
Any CDR file's data can be sent.
l
298 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
Remote Host...
<=====
Requests connection.
=====>
<=====
Sends valid request.
=====>
Receives/stores data.
=====>
Sees blank record; throws away
blank record; closes file.
=====>
Receives/stores data.
=====>
Continues storing data.
==/ /=>
Loses/closes connection.