0000-0999: Status Messages - Avaya CS700 Administration And Maintenance

0000–0999: Status Messages
Table 8: Status Message Definitions
Message
Code
0100
0103
Message
DCB SYSTEM RESTARTED
%s alarm clear on %s: %s
Meaning
Someone ran a system shutdown and
the system restarted at the specified
time. Typically followed by diagnostics
and cold restart messages.
Indicates a network (T1) alarm has
been cleared. Variables are alarm
type, alarm location (Trunk), alarm
classification.
Alarm Type Alarm Classification
Red/Carrier Major/Service Affecting
Yellow/Remote Major/Service Affecting
Carrier
Blue/AIS Non-Alarmed/Service
Affecting
Not Installed Non-Alarmed/
Non-Service Affecting
Maint./Local Non-Alarmed/Service
Maintenance Affecting
Limit/Out of Frame Minor/Non-Service
Affecting
Limit/Slip Minor/Non-Service
Affecting
Limit/Bipolar Minor/Non-Service
Violations Affecting
Limit/CRC Errors Minor/Non-Service
Affecting
Limit/Errored Minor/Non-Service
Seconds Affecting
Sync./Loss of Minor/Non-Service
Primary Affecting
Alarm Location: "T1 Card N Board X"
where N=1–3 and X=A–B; or "T1
Auxiliary Trunk"
Issue 1 August 2007
Log Message Codes
1 of 9
355