Chapter 6: System Maintenance Options - Avaya CS700 Administration And Maintenance

Chapter 6: System Maintenance Options

This chapter describes how to use the System Maintenance menu and several command line
utilities to set up the advanced configurations settings for the audio conferencing system.
Note:
Generally, you will not change the settings discussed in this chapter unless
Note:
special circumstances require it.
The System Maintenance Main Menu
settings. Qualified personnel configure the settings on the screens accessible from this menu
during the manufacturing and installation processes. The values are set in accordance with your
installation site's particular requirements.
System Maintenance Main Menu
Note:
Log in to the management interface as dcbmaint to access the options described
Note:
in this chapter. See
This chapter is organized as follows:
Configuring Network Settings
l
synchronization, layer 1, signaling parameters, and outbound port groups.
Configuring T3
l
cards.
Configuring the FDAPI
l
auxiliary functions (operator, music, record/playback, dedicated link lines).
Configuring the System Hosts File
l
hostname entries in the system's hosts file.
Adjusting the Channel Transmission Level
l
decibel level for system channels.
is the system's interface to advanced configuration
+-- System Maintenance Main Menu --+
¦
¦ Network Configuration
¦ FDAPI Configuration
¦
¦ Clear Network Statistics
¦
¦
¦
¦
¦
+----------------------------------+
Logging In
on page 130 describes how to configure trunk
on page 148 describes the manual process required to configure the T3
on page 159 describes how to specify system channels for
on page 163 describes how to view, add, and modify
LAN Configuration
Administrator Menu
Re-Initialization
System Shutdown
Transmission Level
EXIT
on page 115 for more information.
on page 164 describes how to adjust the
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
Issue 1 August 2007 129