Verifying Date And Time; Resolving Alarms - Avaya S8700 Series Installing And Configuring

Completing the installation administration

Verifying date and time

These steps verify the date and time.
1. Type display time and press Enter.
display time
WARNING: Changing the date or time may impact BCMS, CDR, SCHEDULED
2. Verify that the date and time are correct.
3. Verify that the correct rule (number) is displayed in the Daylight Savings Rule field.
4. If correct, press Cancel.
5. If not, go to the Maintenance Web Interface.
6. Under Server, click Set Server Time/Timezone.
7. Verify that the date and time are correct. If not, set it here.
8. Repeat steps 1 through 3.

Resolving alarms

Note:
You can only resolve alarms on the active media server.
Note:
To resolve alarms:
1. Under Alarms click Current Alarms.
2. Select the server alarms to be cleared and click Clear.
3. Resolve any major alarms using SAT commands and a terminal emulation application, such
as Native Configuration Manager or MS HyperTerminal.
74 Installing and Configuring the Avaya S8700 Series Media Server
DATE
Day of the Week: Friday
Day of the Month: 8
TIME
Hour: 14 Minute: 19
Daylight Savings Rule: 0
DATE AND TIME
Month: November
Year: 2002
Second: 36 Type: Standard
Page 1 of 1