Checking The Software Version; Changing The Date And Time; Copying Files To The Media Server (If Any); Configuring The Network Parameters - Avaya S8700 Series Manual

Migrating from an S8700 Media Server to an S8710 Media Server

Checking the software version

To check the software version:
1. Under Server, click Software Version.
2. Verify the software version.

Changing the date and time

To change the date and time:
1. Under Server, click Server Date/Time.
2. Change the date, time, and time zone as needed.
3. Click Submit to effect the changes.

Copying files to the media server (if any)

You must copy the required files from the services laptop to the media server. This includes the
software update file and firmware for programmable circuit packs.
Note:
Do not copy the Linux migration upgrade set using this method.
Note:
Note:
The latest firmware for the programmable circuit packs and media modules may
Note:
be on the CD.

Configuring the network parameters

!
Important:
If you backed up files to the services laptop, do not perform this procedure. Go to
Important:
Selecting the media server type
Note:
If you backed up to the customer's network, you must readminister the Ethernet
Note:
port connecting to the customer's network. You must have the host name, IP
address, subnet mask and default gateway for the two media servers and the
active server as well as the IP address for the Ethernet port connecting to the
customer's network.
174 Migrating to the Avaya S8700 Media Server
on page 179.