Bios Advanced Menu Network Stack Options - Oracle X6-2 Service Manual

Setup Options
TPM State
Pending Operation
Current Status
Information
TPM Enabled Status
TPM Active Status
TPM Owner Status

BIOS Advanced Menu Network Stack Options

The following table lists the BIOS Advanced Menu Network Stack options.
BIOS Advanced Menu Network Stack Options
TABLE 34
Setup Options
Network Stack
Ipv4 PXE Support
Options Defaults
Disabled/Enabled Disabled
None/Enable Take None
Ownership/Disable Take
Ownership/TPM Clear
Disabled/Enabled Disabled
Deactivated/Activated Deactivated
Owned/Unowned Unowned
Options Defaults
Disabled/Enabled Enabled
Disabled/Enabled Enabled
BIOS Advanced Menu Selections
Description
option. If disabled, the OS
will not show TPM. Reset
of the platform is required.
Displays whether TPM
Support is enabled.
Note - This option is
available only if TPM
Support is set to enabled.
Used to schedule an
operation for the security
device.
Your computer will
Note -
reboot during restart in
order to change the state of
a security device.
If TPM Support is
disabled, Current Status
Information displays
SUPPORT Turned OFF."
Use this option to provide
the current capability state
of the security device.
Note - This option is
available only if TPM
Support is set to enabled.
Use this option to provide
the current capability state
of the security device.
Note - This option is
available only if TPM
Support is set to enabled.
Use this option to provide
the current ownership
state.
Note - This option is
available only if TPM
Support is set to enabled.
Description
Enable or disable the UEFI
network stack.
Enable or disable IPv4
PXE Boot support. If
BIOS Setup Utility Menu Options 237