Configuring The Role - Motorola WiNG 4.4 Reference Manual

6 - 44 WiNG 4.4 Switch System Reference Guide
5. To enable a Denial of Service Attack filter, select a disabled rule from the table and click the Enable button.The
Enabled field will show a green checkmark next to the Denial of Service Attack filters that are enabled on the switch
firewall.
6. To disable a Denial of Service Attack filter, select an enabled rule from the table and click the
a DoS Attack filter is disabled a red "X" will be shown in the
NOTE: Of the 28 DoS Attack filters supported by the switch, 10 can be disabled
individually. Those filters are:
7. To enable all Denial of Service Attack filters, click on the
green checkmark next to the Denial of Service Attack filters that are enabled on the switch firewall.
8. To disable all Denial of Service Attack filters, click on the
red "X" will be shown in the
9. To clear statistics for Denial of Service Attacks, click the
and all Last Occurrence
10.Click the Apply
11.Click the Revert
configuration.

6.4.15 Configuring the Role

To view configured roles:
1. Select Security
2. Click the Configuration
• Smurf
• Twinge
• Invalid IP protocol
• ICMP router advertisement
• Src ip route
• Echo ports
• Snork
• FTP bounce
• TCP intercept
•
Bcast Mcast ICMP
Check Enabled
times to 0:00:00.00.
button to save the changes made within the DoS Attach screen.
button to cancel any changes made within the DoS Attach screen and revert back to the last saved
> Wireless Firewall from the main tree menu.
tab.
Check Enabled
Enable All button.The
Disable All button. When a DoS Attack filter is disabled a
column.
Clear Stats button. This will reset all
Disable button. When
column.
Check Enabled field will show a
Attack Counts
Check
to 0