Table of Contents
Advertisement
4 - 148 WiNG 4.4 Switch System Reference Guide
7. To disable Secure Mode, click the
MAC Address and mode will be saved in the running configuration. If secure-mode is set to disable, it means that
WISP-e transactions for this AP will not be secured.
8. When using clustering and the Cluster GUI feature is enabled, a pull-down menu will be available to select which
cluster members' APs are displayed. To view APs from all cluster members, select
view APs radios from a specific cluster member, select that member's IP address from the pull-down menu.
4.9.6 Configuring Adaptive AP Firmware
Refer to the
AP Firmware
Access Port or Adaptive AP. The screen allows you to update the firmware image for Adaptive APs that associate with the
switch.
To view AP firmware information:
1. Select
Network
2. Click the
AP Firmware
Disable Secure Mode
tab to view the Access Port and Adaptive AP firmware image associated with each adopted
>
Access Port
from the main menu tree.
tab.
button to disable secure-mode to a set of APs. The AP's
All
from the pull-down menu. To
Advertisement
Table of Contents
Troubleshooting
