Motorola WiNG 4.4 Reference Manual page 80

3 - 22 WiNG 4.4 Switch System Reference Guide
2. Select the PoE
Switch Note: The PoE screen is available on the RF6000 and RFS4000 switches. The
RFS7000 switch does not have Power over Ethernet on any ports and will not display the
PoE tab.
The PoE Global Configuration
Power Budget
Power
Consumption
Power Usage
Threshold for
Sending Trap
If you have modified the
Port
PoE
Class
tab
section displays the following power information.
Displays the total watts available for Power over Ethernet on the switch.
Displays the total watts in use by Power over Ethernet on the switch.
Specify a percentage of power usage as the threshold before the switch sends an SNMP trap. The
percentage is a percentage of the total power budget of the switch.
Power Usage Threshold for Sending Trap
Displays the port name for each of the PoE capable ports.
Displays the PoE status of each PoE capable port. Status will display Up when PoE is
available on the port and Down when PoE is unavailable on the port.
Displays the IEEE Power Classification for each port:
Class Number
0 (unknown)
1
2
3
value, click the Apply
Maximum Power Required from Switch
15.4 Watts
4 Watts
7 Watts
15.4 Watts
button to save the changes.