Table of Contents
Advertisement
4 - 146 WiNG 4.4 Switch System Reference Guide
2. Click the
Sensor
3. Specify the global default
4. In the
Default Configuration
DHCP to obtain IP Address automatically
to provide them. Selecting this disables the IP address field and the Subnet Mask field. Enter the
Subnet Mask
Server
Address, and the
information:
Index
MAC Address
VLAN
Last Heard (sec)
IP Address
Revert to AP
tab.
VLAN ID
and the
section, give the default configuration values of the WIPS server. Unselect the
of the default VLAN in the respective fields. Also enter the
Secondary WIPS Server
Displays the numerical value assigned to each sensor AP.
Displays the Media Access Control (MAC) address for each sensor AP.
Displays the VLAN that each sensor AP is associated with.
Displays the number of seconds since the switch last received packets from each sensor AP.
Displays the current IP address for each sensor AP.
Select a sensor AP from the table and click the
AP back to a standard Access Port.
Ping Interval
for all sensors and click the
option to assign IP address of the VLAN manually and do not want DHCP
Address. The
Sensor Display Table
Revert to AP
Apply
button.
IP Address
Gateway IP
Address,
Primary WIPS
displays the following
button to return to convert the
Use
and the
Advertisement
Table of Contents
Troubleshooting
