Table of Contents
Advertisement
5 - 32 WiNG 4.4 Switch System Reference Guide
5.3.6 Viewing NTP Status
Refer to the
NTP Status
Verifying the switch's SNTP status is important to assess which resource the switch is currently getting its system time
from, as well as the time server's current differences in time attributes as compared to the current switch time.
CAUTION: After an NTP synchronization using a Symmetric Key, the NTP status will not
automatically update.
To review the switch's current NTP associations:
1. Select
Services
2. Select the
NTP Status
3. Refer to the
SNTP Status
NTP server:
Leap
Stratum
Reference
Frequency
Precision
Reference time
Clock Offset
tab to display performance (status) information relative to the switch's current NTP association.
>
Secure NTP
from the main menu tree.
tab.
field to review the accuracy and performance of the switch's ability to synchronize with a
Indicates if a second will be added or subtracted to SNTP packet
transmissions, or if the transmissions are synchronized.
Displays how many hops the switch is from its current NTP time source.
Displays the address of the time source the switch is synchronized to.
A SNTP server clock's skew (difference) for the switch
Displays the precision (accuracy) of the switch's time clock (in Hz). The
values that normally appear in this field range from -6 for mains-frequency
clocks to -20 for microsecond clocks found in some workstations.
Displays the time stamp at which the local clock was last set or corrected.
Displays the time differential between switch time and the NTP resource.
Advertisement
Table of Contents
Troubleshooting
