Table of Contents
Advertisement
12.Check the
Logout on Browser Close
browsers.
13.Specify the maximum
Hotspot Simultaneous Users
for the selected WLAN.
14.Enter a value in the
Pre-authenticated VLAN
authorized. Specify the vlan within the range <1-4096>.
15.Enter a value in seconds in the
ready state after the MU disassociation.
16.Check the
Guest Login
17.Check the
Radius Based
RADIUS authentication is not available for hotspot user validation.
18.Check the
Hotspot failover
the No Service page when an authentication server/a critical resource is not available when a user tries to access
resources using the hotspot.
19.Refer to the
Status
field for the current state of the requests made from applet. This field displays error messages if
something goes wrong in the transaction between the applet and the switch.Click
configuration and close the dialog.
20.Click
Cancel
to close the dialog without committing updates to the running configuration.
Configuring External Hotspot
Selecting the external option entails hosting your own external Web server using advanced Web content (using XML,
Flash). To create a hotspot maintained by an external server:
1. Select
Network
>
Wireless LANs
2. Select an existing WLAN from those displayed within the
button to log out hotspot users from the network when they close their web
field to configure a default vlan to be used until the user gets
Cache Ageout Time
checkbox to allow the guest login option.
checkbox to provide the user a RADIUS authenticated login option. When unchecked,
checkbox to enable the hotspot failover option. Hotspot failover is a feature that displays
from the main menu tree.
to set a limit on the number of concurrent unique hotspot users
field. This is the time in seconds to age out the hotspot data
OK
Configuration
tab and click the
Network Setup 4 - 41
to use the changes to the running
Edit
button.
Advertisement
Table of Contents
Troubleshooting
