Motorola WiNG 4.4 Reference Manual page 276

4 - 172 WiNG 4.4 Switch System Reference Guide
4.12.1.3 Configuring an Advanced Hotspot
A customer may wish to use advanced Web content (XML, Flash) but might not have (or would not want to use) an external
Web server, choosing instead to host the Web pages on the switch's HTTP Web server. Selecting the
allows for importing the Web pages from an external source (like an FTP server) and hosting them on the switch.
To use the Advanced
1. Select Network
2. Select an existing hotspot entry from those displayed within the
3. Click the Edit
menu.
NOTE: Advanced hotspot configuration is not permissible using the switch Web UI. Refer
to the switch CLI or other advanced configuration options to define a hotspot with
advanced properties. However, the switch can still install and maintain directories
containing Web page content.
4. Once the properties of the advanced hotspot have been defined, the file can be installed on the switch and used to
support the hotspot. The following parameters are required to upload the file:
a. Specify a source hotspot configuration file. The file used at startup automatically displays within the
parameter.
b. Refer to the
c. Enter the IP Address
is valid or risk jeopardizing the success of the file transfer.
option to define the wired hotspot:
> Wired Hotspot from the main menu tree.
button. Ensure that Advanced
Using drop-down menu to configure whether the hotspot file transfer is conducted using FTP or TFTP.
of the server or system receiving the source hotspot configuration. Ensure that the IP address
Configuration
is selected from the This WLAN's Web Pages are of the
Advanced
tab.
drop-down
File
option