Unauthorized Aps (Mu Reported); Ap Containment - Motorola WiNG 4.4 Reference Manual

6.2.4 Unauthorized APs (MU Reported)

Use the Unauthorized APs (MU Reported)
criteria for Access Point approval was defined using the
values defined within the
associated MUs:
1. Select Security
2. Click on the -Unauthorized APs (MU Reported)
3. The Unauthorized APs (MU Reported)
BSS MAC Address
Reporting MU
Last Seen (In
Seconds)
ESSID
4. The Number of Unauthorized APs
5. Click the Export

6.2.5 AP Containment

Use the rogue AP Containment
units associated with the Rogue AP and prevents new mobile units from getting associated to the Rogue AP.
To configure Access Point Containment and view rogue APs:
1. Select Security
tab to review unapproved Access Points detected by associated MUs. The
MU Assisted Scan field.To view unapproved Access Points detected by switch radio
> Access Point Detection
table displays the following information:
Displays the MAC Address of each Unapproved AP. These MAC addresses are Access Points
observed on the network (by associated MUs), but have yet to be added to the list of approved
APs, and are therefore interpreted as a threat on the network.
Displays the numerical value for the detecting MU.
Displays the time (in seconds) the Unapproved AP was last seen on the network by the detecting
MU. Use this interval to determine whether the detected MU is still a viable threat.
Displays the ESSID of each Unapproved AP. These ESSIDs are device ESSIDs observed on the
network, but have yet to be added to the list of Approved APs and are therefore interpreted as a
threat.
is simply the sum of all of Unapproved Radio MAC Addresses detected.
button to export the contents of the table to a Comma Separated Values file (CSV).
feature to provide protection from rogue Access Points by disrupting traffic to mobile
> Access Port Intrusion Detection
Security > Access Point > Configuration
from the main menu tree.
tab.
from the main menu tree.
Switch Security 6 - 9
screen, using the