Viewing The Switch Alarm Log - Motorola WiNG 4.4 Reference Manual

3.7 Viewing the Switch Alarm Log

Use the Alarm Log
detail, delete alarms, acknowledge alarms, or export alarm data to a user-specified location for archive and network
performance analysis.
To view switch alarm log information:
1. Select Switch > Alarm Log
2. Use the Alarm Log screen's filtering options to view alarm log data by page or by its entire content.
3. Select either of the two available options to view alarm log information:
View By Page
View All
4. Refer to the table within the
Index
Status
Time Stamp
screen as an initial snapshot for alarm log information. Expand alarms (as needed) for greater
from the main menu tree.
Select the View By Page radio button to view alarm log information on a per page basis. Use the
View By Page option to page through alarm logs. If there are a large number of alarms, the user
can navigate to the page that has been completely loaded. All operations can be performed on the
currently loaded data. Enter a page number next to "Page" and click the
specific page.
Select the View All radio button to display the complete alarm log within the table. If there are
a large number of alarms, the
Alarm Log screen for the following information:
Displays the unique numerical identifier for trap events (alarms) generated in the system. Use the
index to help differentiate an alarm from others with similar attributes.
Displays the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The
transaction between the applet and the switch.
Displays the date, year, and time the alarm was raised (as well as the time zone of the system).
The time stamp only states the time the alarm was generated, not the time it was acknowledged.
View All option will take several minutes to load.
Status displays error messages if something goes wrong in the
Switch Information 3 - 41
Go button to move to the