Table of Contents
Advertisement
2. Click the
Remote
tab.
3. Refer to the
Configuration
DNS Server
Enter the numerical IP address of the DNS Server used to route information to the remote
destination of the IPSec VPN.
WINS Server
Enter the numerical IP address of the WINS Server used to route information to the remote
destination of the IPSec VPN.
Apply
Click
Apply
Revert
Click the
4. Click the
IP Range
tab to view the following:.
Index
Enter the index assigned to the range of IP addresses displayed in the Starting and Ending IP
Address ranges. This index is used to differentiate the index from others with similar IP
addresses.
Starting IP Address Enter the numerical IP address used as the starting address for the range defined. If the Ending IP
address is left blank, only the starting address is used for the remote destination.
Ending IP Address
Enter a numerical IP address to complete the range. If the Ending IP address is blank, only the
starting address is used as the destination address.
5. Click the
Edit
button (within the IP Range tab) to modify the range of existing IP addresses displayed.
6. Select an IP address range index and click the
Range tab.
field to define the following:
to save any updates made to the screen.
Revert
button to disregard changes and revert back to the last saved configuration.
Delete
button to remove this range from those available within the IP
Switch Security 6 - 77
Advertisement
Table of Contents
Troubleshooting
