Table of Contents
Advertisement
4 - 46 WiNG 4.4 Switch System Reference Guide
7. Specify the maximum
for the selected WLAN.
8. Check the
Logout on Browser Close
browsers.
9. Enter a value in the
authorized. Specify the vlan within the range <1-4096>.
10.Enter a value in seconds in the
ready state after the MU disassociation.
11.Check the
Guest Login
12.Check the
Radius Based
13.Check the
Hotspot failover
14.Refer to the
Status
something goes wrong in the transaction between the applet and the switch.
15.Click
OK
to use the changes to the running configuration and close the dialog.
16.Click
Cancel
Configuring MAC Authentication
The MAC Authentication option allows the user to configure a Radius server for user authentication with the range of MAC
addressees defined as allowed or denied access to the switch managed network.
NOTE: As part of the MAC Authentication process, ensure a primary and optional
secondary Radius Server have been properly configured to authenticate the users
requesting access to the ACL supported WLAN. For more information on configuring
Radius Server support for the MAC Authentication supported WLAN, see
External Radius Server Support on page
To configure the format of MAC addresses used in MAC Authentications:
1. Select
Network
2. Select an existing WLAN from those displayed within the
3. Click the
Edit
4. Select the
MAC Authentication
This enables the
Hotspot Simultaneous Users
button to log out hotspot users from the network when they close their web
Pre-authenticated VLAN
Cache Ageout Time
checkbox to allow the guest login option.
checkbox to provide the user a radius authenticated login option.
checkbox to enable the hotspot failover option.
field for the current state of the requests made from applet. This field displays error messages if
to close the dialog without committing updates to the running configuration.
>
Wireless LANs
from the main menu tree.
button.
button from within the Authentication field.
Radius
button at the bottom of the
to set a limit on the number of concurrent unique hotspot users
field to configure a default vlan to be used until the user gets
field. This is the time in seconds to age out the hotspot data
4-47.
Configuration
tab.
Network
>
Wireless LANs
Configuring
>
Edit
screen.
Advertisement
Table of Contents
Troubleshooting
