Table of Contents
Advertisement
4 - 16 WiNG 4.4 Switch System Reference Guide
3. Click the
Add
4. Enter the
VLAN ID
5. Provide a
Description
network.
6. The
Primary IP Settings
a. Select
Use DHCP to obtain IP Address automatically
interface. Selecting this option disables the IP address field.
b. Enter the
c. Enter the
7. Select the
Set as Management Interface
switch.
8. Use the
Secondary IP Addresses
provided in this field is used if the primary IP address is unreachable.
Select the
Add
Choose an existing secondary address and select
9. Refer to the
Status
something goes wrong in the transaction between the applet and the switch.
10.Click
OK
to use the changes to the running configuration and close the dialog.
11.Click
Cancel
4.4.1.2 Modifying a Virtual Interface
To modify an existing virtual interface.
CAUTION: When changing from a default DHCP address to a fixed IP address, set a static
route first. This is critical when the switch is being accessed from a subnet not directly
connected to the switch and the default route was set from DHCP.
1. Select
Network
button.
for the switch virtual interface.
for the VLAN, representative of the VLAN's intended operation within the switch managed
field consists of the following:
IP Address
for the VLAN associated virtual interface.
Subnet Mask
for the IP address.
field to define additional IP addresses to associate with VLAN IDs. The address
button (within the
Secondary IP Addresses
field for the current state of the requests made from applet. This field displays error messages if
to close the dialog without committing updates to the running configuration.
>
Switch Virtual Interface
to allow DHCP to provide the IP address for the virtual
checkbox to enable any host displayed in this VLAN to configure the
field) to define additional addresses from a sub screen.
Edit
or
Delete
to revise or remove a secondary address.
from the main tree menu.
Advertisement
Table of Contents
Troubleshooting
