Table of Contents
Advertisement
3. Select an Id and click the
4.10.3.1 Editing a MSTP Port Configuration
To edit and reconfigure MSTP Port parameters.
1. Select a row from the port table and click the
The following MSTP Port parameters can be reconfigured.
Port Index
Admin MAC Enable
Port auto Edge
Port Guard Root
PortFast BPDU Filter
Port FastBPDU Guard Enable this option to change the status of the Port Fast BPDU Guard.
Port Version
Edit
button to revise the selected MSTP port configuration.
Edit
Displays the read-only Port Index.
Displays the status of the Admin MAC Enable. A green check mark indicates the status as
enabled.
Select the checkbox to use the port as an edge port.
Select this checkbox to enable guard root for this port. Typically, each guard root port is a
designated port, unless two or more ports (within the root bridge) are connected together. If the
bridge receives superior (BPDUs) on a guard root-enabled port, the guard root moves the port to
a root-inconsistent STP state. This state is equivalent to a listening state. No data is forwarded
across the port. Thus, the guard root enforces the root bridge position.
Enable this option to change the status of the Port Fast BPDU Filter.
Select a value to reconfigure the port version.
button.
Network Setup 4 - 159
Advertisement
Table of Contents
Troubleshooting
