Table of Contents
Advertisement
Threshold values for:
Displays a threshold value for associated MUs. Use the
MU
input criteria to define an appropriate Threshold Value unique to the MUs within the network. For
information on specific values, see
Threshold values for:
Set a threshold value for adopted APs. Use the
AP
criteria to define an appropriate Threshold Value unique to the APs within the network. For information on
specific values, see
Threshold values for:
Use the
WLAN
Value unique to the switch. For information on specific values, see
7-16.
Threshold values for:
Use the
Switch
Value unique to the switch. For information on specific values, see
7-16.
Unit of Threshold
Displays the measurement value used to define whether a threshold value has been exceeded. Typical
Values
values include Mbps, retries and %. For information on specific values, see
on page
4. Select a threshold and click the
can be modified.
Adjust the values as needed (between 0 -100) to initiate a trap when the value is exceeded for the MU, AP or WLAN.
Ensure the value set is realistic, in respect to the number of MUs and APs supporting WLANs within the switch
managed network.
5. Use the
Maximum Number of Packets to Send a Trap
the minimum number of data packets required for a trap to be generated for a target event. Ensure the value is realistic,
as setting it to low could generate traps unnecessarily. Refer to
additional information.
6. Click the
Apply
button to save changes made to the screen since the last saved configuration.
7. Click the
Revert
button to revert the screen back to its last saved configuration. Changes made since the contents of
the screen were last applied are discarded.
Wireless Trap Threshold Values on page
Wireless Trap Threshold Values on page
Threshold Name
and
Threshold Conditions
Threshold Name
and
Threshold Conditions
7-16.
Edit
button to display a screen wherein threshold settings for the MU, AP and WLAN
Switch Management 7 - 15
Threshold Name
Threshold Name
and
Threshold Conditions
7-16.
as input criteria to define an appropriate Threshold
Wireless Trap Threshold Values on page
as input criteria to define an appropriate Threshold
Wireless Trap Threshold Values on page
field (at the bottom of the screen) to enter a value used as
Wireless Trap Threshold Values on page 7-16
and
Threshold Conditions
as
7-16.
as input
Wireless Trap Threshold Values
for
Advertisement
Table of Contents
Troubleshooting
