Table of Contents
Advertisement
4. Select an existing firmware version and click the
booted next. For more information, see
5. Click on the
Global Settings
information, see
6. Click on the
Update Firmware
Updating the Switch Firmware on page
NOTE: To apply a patch to the switch, follow the same instructions for updating the
switch's firmware.
7. To remove a patch, select it from amongst those displayed within the Patch field and click the
3.4.1 Editing the Switch Firmware
The Edit screen enables the user to select a firmware file and designate it as the version used the next time the switch is
booted.
1. Select the primary firmware image from the Firmware screen.
2. Click the
Edit
button.
The
Firmware
screen displays the current firmware version and whether this version is used for the next reboot.
3. Select the checkbox to use this version on the next boot of the switch.
4. To edit the secondary image, select the secondary image, click the
next reboot
checkbox.
This firmware version will now be invoked after the next reboot of the switch.
5. Refer to the
Status
operation from the applet. The Status field displays error messages if something goes wrong in the transaction
between the applet and the switch.
6. Click the
OK
button to commit the changes made and exit the screen.
3.4.2 Enabling Global Settings for the Image Failover
Use the
Global Settings
1. Select an image from the table in the Firmware screen.
2. Click the
Global Settings
Editing the Switch Firmware on page
button to specify a firmware version for use with the failover image. For more
Enabling Global Settings for the Image Failover on page
button to update the firmware file loaded onto the switch. For more information, see
3-32.
field for the current state of the requests made from the applet. Requests are any "SET/GET"
screen to specify a firmware version for use with the failover image.
button.
Edit
button to change the firmware version used when the switch is
3-31.
Edit
button, and select the
Switch Information 3 - 31
3-31.
Remove Patch
Use this firmware on
button.
Advertisement
Table of Contents
Troubleshooting
