Table of Contents
Advertisement
4 - 142 WiNG 4.4 Switch System Reference Guide
3. Click the
Export
CAUTION: An Access Port is required to have a DHCP provided IP address before
attempting layer 3 adoption, otherwise it will not work. Additionally, the Access Port must
be able to find the IP addresses of the switches on the network. To locate switch IP
addresses on the network:
• Configure DHCP option 189 to specify each switch IP address.
• Configure a DNS Server to resolve an existing name into the IP of the switch. The Access
4.9.3 Access Port Configuration
Use the
Configuration
To view existing adopted Access Port information:
1. Select
Network
2. Click the
Configuration
3. Refer to the
Configuration
MAC Address
AP Type
Country
Ip Filter List
button to export the contents of the table to a Comma Separated Values file (CSV).
Port has to get DNS server information as part of its DHCP information. The default DNS
name requested by an AP300 is "Symbol-CAPWAP-Address". Similarly, The default DNS
name requested by an AP650 is "WISPE_ADDRESS". However, since the default name is
configurable, it can be set as a factory default to whatever value is needed.
tab to view information on all known Access Ports and edit their profiles.
>
Access Port
from the main menu tree.
tab.
screen for the following information:
Displays the radio's first MAC address when it is adopted by the switch.
Displays the Access Port type.
Displays the country the Access Port is configured to operate in.
Displays the list of IP filters assigned to this AP.
Advertisement
Table of Contents
Troubleshooting
