Motorola WiNG 4.4 Reference Manual page 169

WLAN enabled Displays the status of the WLAN. A Green check defines the WLAN as enabled and a Red "X"
means it is disabled. The enable/disable setting can be defined using the
Configuration
WMM enabled Displays WLAN-WMM status. It can be enabled (for a WLAN) from the WLAN Configurations
Edit screen by selecting the Enable WMM checkbox.
Access Displays the Access Category for the intended radio traffic. Access Categories are the
different WLAN-WMM options available.
The four Access Category types are:
• Background — Optimized for background traffic
• Best-effort — Optimized for best effort traffic
• Video — Optimized for video traffic
• Voice — Optimized for voice traffic
AIFSN Displays the current Arbitrary Inter-frame Space Number (AIFSN). Higher-priority traffic
categories should have lower AIFSNs than lower-priority traffic categories. This will cause
lower-priority traffic to wait longer before attempting access.
Transmit Ops Displays the maximum duration a device can transmit after obtaining a transmit opportunity.
For higher-priority traffic categories, this value should be set to a
low number.
CW Min The CW Min is combined with the CW Max to make the Contention screen. From this range,
a random number is selected for the back off mechanism. Lower values are used for higher
priority traffic.
CW Max The CW Max is combined with the CW Min to make the Contention screen. From this range,
a random number is selected for the back off mechanism. Lower values are used for higher
priority traffic.
Max Retries Displays the maximum number of retries for each WMM index.
NOTE When using an AP-7131 in Adaptive AP Mode, you must enable WMM on the
associated WLAN in order to achieve the highest data rates available.
3. Click the Edit button to display a screen used to modify the WMM parameters. For more information, see
WMM Settings on page 4-67.
screen.
Network Setup 4 - 65
WLAN
Editing