Table of Contents
Advertisement
4 - 48 WiNG 4.4 Switch System Reference Guide
2. Select an existing WLAN from those displayed within the
3. Click the
Edit
4. Select either the
enables the
Radius Config...
5. Select the
Radius Config...
Server.
The
Radius Configuration
overview and configuration information, see
6. Refer to the
Server
RADIUS Server
Address
RADIUS Port
RADIUS Shared
Secret
Server Timeout
Server Retries
button.
EAP 802.1x, Hotspot,
or
button at the bottom of the Network > Wireless LANs > Edit screen.
button. The
Radius Configuration
screen contains tabs for defining both the Radius and NAC server settings. For NAC
field and define the following credentials for a primary and secondary Radius server.
Enter the IP address of the primary and secondary server acting as the Radius user
authentication data source.
Enter the TCP/IP port number for the primary and secondary server acting as the Radius
user authentication data source. The default port is 1812.
Provide a shared secret (password) for user credential authentication with the primary or
secondary Radius server.
Enter a value (between 1 and 300 seconds) to indicate the number of elapsed seconds
causing the switch to time out on a request to the primary or secondary server.
Enter a value between 1 and 100 to indicate the number of times the switch attempts to
reach the primary or secondary Radius server before giving up.
Configuration
Dynamic MAC ACL
button from within the
screen displays for defining an external Radius or NAC
Configuring NAC Server Support on page
tab.
Authentication
4-50.
field. This
Advertisement
Table of Contents
Troubleshooting
