Motorola WiNG 4.4 Reference Manual page 165

4. Refer to the Information
ESSID Displays the Service Set ID (SSID) for the selected WLAN.
VLAN Displays the name of the VLAN the WLAN is associated with.
Num Associated Displays the total number of MUs currently associated with the selected WLAN.
MUs
Authentication Displays the authentication method deployed on the WLAN.
Type
Encryption Type Displays the encryption type deployed on the selected WLAN.
Adopted Radios Displays the radios adopted by the selected WLAN.
5. Refer to the Traffic field for the following information (both received and transmitted):
Pkts per second Displays the average total packets per second that cross the selected WLAN. The Rx column
displays the average total packets per second received on the selected WLAN. The Tx column
displays the average total packets per second sent on the selected WLAN. The number in
black represents this statistics for the last 30 seconds and the number in blue represents this
statistics for the last hour.
Throughput Displays the average throughput in Mbps on the selected WLAN. The Rx column displays the
average throughput in Mbps for packets received on the selected WLAN. The Tx column
displays the average throughput for packets sent on the selected WLAN. The number in black
represents this statistics for the last 30 seconds and the number in blue represents this
statistics for the last hour.
Avg Bit Speed Displays the average bit speed in Mbps on the selected WLAN. This includes all packets sent
and received. The number in black represents this statistics for the last 30 seconds and the
number in blue represents this statistics for the last hour.
Non-unicast Pkts Displays the percentage of the total packets for the selected WLAN that are non-unicast.
Non-unicast packets include broadcast and multicast packets. The number in black
represents this statistics for the last 30 seconds and the number in blue represents this
statistics for the last hour.
6. Refer to the RF Status field for the following information:
Avg MU Signal Displays the average RF signal strength in dBm for all MUs associated with the selected
WLAN. The number in black represents this statistics for the last 30 seconds and the number
in blue represents this statistics for the last hour.
Avg MU Noise Displays the average RF noise for all MUs associated with the selected WLAN. The number
in black represents this statistics for the last 30 seconds and the number in blue represents
this statistics for the last hour.
Avg MU SNR Displays the average Signal to Noise Ratio (SNR) for all MUs associated with the selected
WLAN. The Signal to Noise Ratio is an indication of overall RF performance on your wireless
network.
field for the following information:
Network Setup 4 - 61