Configuring Radius Users - Motorola WiNG 4.4 Reference Manual

6 - 98 WiNG 4.4 Switch System Reference Guide
NOTE: The same configuration is supported for the Secondary LDAP agent of the
Secondary LDAP server also.
6. Click the Apply
7. Click the Revert

6.8.5 Configuring Radius Users

Refer to the Users
employed when Local
To define the Radius user permissions for switch access:
1. Select Security
2. Select the Users
3. Refer to the following to assess whether an existing user can be used with the local Radius server as is, requires
modification or if a new user is required.
User ID
Guest User
Start Date
Expiry Date
4. Refer to the Available Groups
If the group assignment is insufficient, use the
group assignments. For guest users, only the password is editable. For normal (non-guest) users, the password and
button to save the changes made to within the screen.
button to cancel any changes made within the screen and revert back to the last saved configuration.
tab to view the current set of users and groups assigned for the Radius server. The Users tab is
is selected as the Auth Data Source within the
> Radius Server from the main menu.
tab.
Displays the username for this specific user. The name assigned should reflect the user's identity
and perhaps their status within the switch managed network (guest versus secure user).
Displays whether a specific user has been defined as a guest user (with a green check) or has
been configured as permanent user. Guest users have temporary access.
Defines the time when Guest User's privileges commence.
If the user has been assigned guest privileges, they were also assigned a date when their Radius
privileges expire.
field to view the memberships for existing users.
Authentication & Accounting
Edit or Add functions to modify/create users or modify their existing
tab.