Table of Contents
Advertisement
4 - 8
WiNG 4.4 Switch System Reference Guide
4.2.3 Viewing Address Resolution
The
Address Resolution
address resolution details:
1. Select
Network
2. Select the
Address Resolution
3. Refer to the
Address Resolution
Interface
IP Address
MAC Address
Type
4. Click the
Clear
table displays the mapping of layer three (IP) addresses to layer two (MAC) addresses. To view
>
Internet Protocol
from the main tree menu.
tab.
table for the following information:
Displays the name of the actual interface where the IP address was found (typically a VLAN).
Displays the IP address being resolved.
Displays the MAC address corresponding to the IP address being resolved.
Defines whether the entry was added statically or created dynamically in respect to network traffic.
Entries are typically static.
button to remove the selected AP entry if no longer usable.
Advertisement
Table of Contents
Troubleshooting
