Configuring Snmp Trap Receivers - Motorola WiNG 4.4 Reference Manual

7.5 Configuring SNMP Trap Receivers

Refer to the Trap Receivers
address, port, community and trap version). A new v2c or v3 trap receiver can be added to the existing list by clicking the
Add button.
To configure the attributes of SNMP trap receivers:
1. Select Management Access > SNMP Trap Receivers
2. Refer to the following SNMP trap receiver data to assess whether modifications are required.
Destination Address
Port
Community String/
User Name
Trap Version
3. Highlight an existing Trap Receiver and click the
Receiver.
Edit Trap Receivers as needed if existing trap receiver information is insufficient. You can only modify the IP address,
port and v2c or v3 trap designation within the Edit screen. For more information, see
page 7-18.
4. Highlight an existing Trap Receiver and click the
destinations available to receive SNMP trap information.
Remove Trap Receivers as needed if the destination address information is no longer available on the system.
screen to review the attributes of existing SNMP trap receivers (including destination
The Destination Address defines the numerical (non DNS name) destination IP address for receiving
traps sent by the SNMP agent.
The Port specifies a destination User Datagram Protocol (UDP) receiving traps.
Displays the Community String and User Name specific to the SNMP-capable client that receives
the traps. The community name is public.
The Trap Version defines the trap version (v1/2 or v3) defined by the SNMP-capable client
receiving the trap. A trap designation cannot be modified.
from the main menu tree.
Edit button to display a sub-screen used to modify the v2c or v3 Trap
Delete button to remove the Trap Receiver from the list of available
Switch Management 7 - 17
Editing SNMP Trap Receivers on