Motorola WiNG 4.4 Reference Manual page 497

6. Click on Delete
7.6.1.1 Creating a New Local User
Local users are those users connected directly into the switch and do not require any sort of configurable remote
connection.
To create a new local user:
1. Select Management Access
2. Click the Add button within the Local Users tab.
3. Enter the login name for the user in the
4. Enter the authentication password for the new user in the
Confirm Password
5. Select the role you want to assign to the new user from the options provided in the
one or more of the following options:
Monitor
Help Desk Manager
Network Administrator
System Administrator
Web User Administrator
Super User
button to delete the selected user from the Users frame.
> Users from the main menu tree.
Username
field.
Select Monitor to assign regular user permissions without any administrative rights. The Monitor
option provides read-only permissions.
Assign this role to someone who typically troubleshoots and debugs problems reported by the
customer. The Help Desk Manager typically runs troubleshooting utilities (like a sniffer), executes
service commands, views/retrieves logs and reboots the switch.
The Network Administrator
config, VLANs, Layer 2/Layer 3 security, WLANs, radios, IDS and hotspot.
Select System Administrator
parameters, licenses, perform image upgrade, auto install, manager redundancy/clustering and control
access.
Assign Web User Administrator
Select Super User to assign complete administrative rights.
field. Ensure this name is practical and identifiable to the user.
Password field and reconfirm the same again in the
has privileges to configure all wired and wireless parameters like IP
to allow the user to configure general settings like NTP, boot
privileges to add users for Web authentication (hotspot).
Switch Management 7 - 21
Associated Roles panel. Select