Viewing The Attributes Of Existing Host Pools - Motorola WiNG 4.4 Reference Manual

5 - 10 WiNG 4.4 Switch System Reference Guide
5.2.1.4 Configuring DHCP Server DDNS Values
The DHCP Server screen's Configuration tab can be used to display an additional
a DDNS domain name and address for use with the switch.
NOTE: For an additional (in depth) discussion on the DDNS setup options available on the
switch (using both the switch CLI and Web UI), refer to Chapter 7 of the Migration Guide
available for download from the corporate Website.
To configure a global domain name and DDNS server address:
1. Select Services
2. Highlight an existing pool name from within either the Configuration or Host Pool tabs and click the
the bottom of the screen.
3. Enter a Domain Name
4. Define the TTL
5. Use the Automatic Update
Server update
DHCP clients.
6. Select the Enable Multiple User Class
7. Use the DDNS Servers
8. Click OK to save and add the changes to the running configuration and close the dialog.
9. Refer to the Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET" operation from the
applet. The Status field displays error messages if something goes wrong in the transaction between the applet and
the switch.
10.Click Cancel

5.2.2 Viewing the Attributes of Existing Host Pools

Refer to the Host Pool
MAC addresses. This information can be an asset in determining if a new pool needs to be created or an existing pool
requires modification.
To view the attributes of existing host pools:
> DHCP Server from the main menu tree.
which represents the forward zone in the DNS server. For example test.net.
(Time to Live) to specify the validity of DDNS records. The maximum value is 864000 seconds.
drop-down menu to specify whether the automatic update feature is on or off. Select
to enable a DDNS update from the DHCP server. Select
checkbox if multiple user class support is needed.
field to define the IP addresses of the DNS servers.
field.
to close the dialog without committing updates to the running configuration
tab within the DHCP Server screen to view how the host pools reserve IP addresses for specific
DDNS screen. Use this screen to define
Client update to get the DDNS updates from
DDNS button at