Motorola WiNG 4.4 Reference Manual page 87

2. Refer to the Source field to define the location and address information for the source config file.
From Select the location representing the source file's current location using the
menu. Options include
File Specify a source file for the file transfer. If the switch is selected, the file used at startup
automatically displays within the File parameter.
Using Refer to the
FTP or TFTP. FTP transfers require a valid user ID and password.
IP Address Enter the
address is valid or risk jeopardizing the success of the file transfer.
User ID Enter the
Password Enter the
Path Specify an appropriate
Target options are different depending on the target selected.
3. Refer to the Target field to specify the details of the target file.
To Use the
switch (default location), external server, or local disk.
File Use the
attached files systems for target file location.
4. Refer to the Status field for the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The
between the applet and the switch.
5. Click the Transfer button when ready to move the target file to the specified location. Repeat the process as necessary
to move each desired configuration file to the specified location.
6. Click the Abort button to cancel the file transfer process before it is complete.
7. Click the Close button to exit the Transfer screen and return to the Config Files screen. Once a file is transferred, there
is nothing else to be saved within the Transfer screen.
Server, Local Disk,
Using drop down-menu to configure whether the log file transfer is conducted using
IP Address of the server or system receiving the source configuration. Ensure the IP
User ID credentials required to transfer the configuration file from a FTP server.
Password required to send the configuration file from an FTP server.
Path name to the target directory on the local system disk or server. The
To drop-down menu to define the location of the configuration file. Options include the
File field to specify a target file for the file transfer. Use the File Browser icon to search
Status field displays error messages if something goes wrong in the transaction
Switch Information 3 - 29
and Switch.
From drop-down