Table of Contents
Advertisement
6 - 110 WiNG 4.4 Switch System Reference Guide
appropriate.
Associate the certificate selected with one of the options provided in the Specify a key for your new certificate and
click the
Next
If generating a new self-signed certificate (as selected in page 2 of the wizard), the wizard continues the installation.
Use the third page of the wizard to enter a unique trustpoint name and other credentials required to create the new
certificate.
3. Select the
Configure the trustpoint
4. Select the
Automatically generate certificate with default values
the switch assigns by default.
This option is recommended for generic certificates that do not represent a unique or custom switch configuration.
5. Select the
Enter certificate credentials
anticipate using generic (default) values, consider using the Automatically generate certificate with default values
option.
6. Provide the following information for the certificate:
Country
State
City
Organization
button.
checkbox to enable the new self signed certificate configured as a trustpoint
radio button to manually enter the values of a unique certificate. If you
Define the Country used in the Self-Signed Certificate. By default, the Country is US. The field
can be modified by the user to other values. This is a required field and must not exceed 2
characters.
Enter a State/Prov. for the state or province name used in the Self-Signed Certificate. By default,
the State/Prov. field is CA. This is a required field.
Enter a City to represent the city name used in the Self-Signed Certificate. By default, the City
name is San Jose. This is a required field.
Define an Organization for the organization used in the Self-Signed Certificate. By default, it is
Motorola Solutions, Inc. The user is allowed to modify the Organization name. This is a required
field.
checkbox to create a certificate using values
.
Advertisement
Table of Contents
Troubleshooting
