Motorola WiNG 4.4 Reference Manual page 200

4 - 96 WiNG 4.4 Switch System Reference Guide
3. Select a radio to edit from the table.
4. Click the Edit
5. The Switch field displays the IP address of the cluster member associated with each Access Port radio. When
clustering is enabled on the switch and Cluster GUI is enabled, the
Radio edit screen. For information on configuring and enabling Cluster GUI, see
6. In the Radio Descr.
of the same type and can be used to locate a radio if there are any problems.
7. Select the Dedicate this AP as Detector AP
network.
Setting this radio as a detector dedicates the radio to detect rogue APs on the network. Dedicated detectors do not
connect to clients.
8. Select the Single-channel scan for Unauthorized APs
the radio's current channel of operation.
9. Select the Enable Enhanced Beacon Table
potentially unauthorized APs across all bands.
This option utilizes radio bandwidth, but is an exhaustive means of scanning across all available channels and listening
for AP beacon traffic. Once probe responses are received, a network device management application like Motorola
Solutions RFMS or the Wireless Intrusion Detection System (WIDS) can locate the device and remove it if defined as
unauthorized.
10.Select the Enable Enhanced Probe Table
the probes required to obtain MU RSSI information.
RSSI data (as obtained by at least three detecting radios) can be used by the Motorola Solutions RFMS application to
triangulate the location of an MU on a site map representative of the actual physical dimensions of the switch radio
coverage area. Once located on a site map, intuitive decisions can be made regarding the MU's authorization within
the switch-managed network.
button to display a screen containing settings for the selected radio.
field, enter a brief description to differentiate the radio. The description is used to describe radios
Switch
option to use this radio as a detector port to identify rogue APs on the
option to enable the switch to scan for rogue devices using
option to allow adopted Access Port or Access Point radios to scan for
option to enable an adopted Access Port or Access Point radio to forward
field will be available on the Access Port
Managing Clustering Using the Web UI.