Table of Contents
Advertisement
6. Click
OK
to save and add the changes to the running configuration and close the dialog.
7. Refer to the
Status
something goes wrong in the transaction between the applet and the switch.
8. Click
Cancel
to close the dialog without committing updates to the running configuration.
7.3.3 Accessing SNMP v2/v3 Statistics
Refer to the
Statistics
displays Usm Statistics (SNMP V3 specific events specific to the User-based Security Model) and their values.
To edit an SNMP v3 user profile:
1. Select
Management Access
2. Select the
Statistics
3. Refer to the following read-only statistics displayed within the SNMP Access Statistics screen:
V2/V3 Metrics
Values
field for the current state of the requests made from applet. This field displays error messages if
screen for a read-only overview of SNMP V2/V3 events and their current values. The screen also
>
SNMP Access
tab from within the SNMP Access screen.
Displays the individual SNMP Access events capable of having a value tracked for them. The metrics range
from general SNMP events (such as the number of SNMP packets in and out) to specific error types that can
be used for troubleshooting SNMP events (such as Bad Value and Read-Only errors).
Displays the current numerical value for the SNMP V2/V3 Metric described on the left-hand side of the
screen. The value equals the number of times the target event has occurred. This data is helpful in
troubleshooting SNMP related problems within the network.
from the main menu tree.
Switch Management
7 - 9
Advertisement
Table of Contents
Troubleshooting
