Motorola WiNG 4.4 Reference Manual page 417

2. Click the Configurations
During IKE negotiations, peers must identify themselves to one another. Thus, the configuration you define is the
identification medium for device recognition.
3. Set a Keep Alive interval (in seconds) the switch uses for monitoring the continued presence of a peer and report of
the client's continued presence. The client notifies you when the peer is no longer present. The default interval is 10
seconds.
4. Click the Apply button (within the IKE Settings field) to save the configuration.
5. Click the Revert (within the IKE Settings field) to rollback to the previous configuration.
6. Refer to the Pre-shared Keys
Peer IP Address Use the Peer IP Address to associate an IP address with the specific tunnel used by a group of
peers.
Key Displays the string ID a remote peer uses to look up pre-shared keys.
NOTE: Please note that RSA keys are not supported for IKE negotiation on this switch.
7. Highlight an existing set of pre-shared Keys and click the
8. Select an existing entry and click the
tab.
field to review the following information:
Delete button to remove it.
Edit button to revise the existing peer IP address and key.
Switch Security 6 - 65