Motorola WiNG 4.4 Reference Manual page 388

6 - 36 WiNG 4.4 Switch System Reference Guide
2. Click the Configuration
3. Click the ACL
4. Select an ACL from the ACLs field.
The rules associated with the selected ACL display in the Associated Rules section.
5. Click the Edit
6. Use the Precedence
The rules within an ACL are applied to packets based on their precedence value. Rules with lower precedence are
always applied first.
NOTE: If adding an access control entry to an ACL using the switch SNMP interface,
Precedence
7. Use the Operation
action is to mark, the packet is tagged for priority.
8. Select the Logging
on the criteria specified in the access lists.
9. If mark is selected from within the
necessary, select the
mark designation.
10.From within the
The source is the source address of the network or host in dotted decimal format. The Source-mask is the network
mask.
11.Use the Source Address
NOTE: If an Extended IP ACL is used, a Destination Wildcard/Mask and Destination
Address are required.
12.Refer to the Status
something goes wrong in the transaction between the applet and the switch.
tab.
tab.
button within the Associated Rules field.
field to modify the precedence (priority) between 1 and 5000.
is a required parameter.
drop-down menu (if necessary) to modify the permit, deny or mark designation for the ACL. If the
checkbox to generate log messages when a packet has been forwarded, denied or marked based
Operations
802.1p (0 - 7) or TOS(0 - 255)
Filters field, modify (if necessary) the
field to revise (if necessary) the IP address where the packets are sourced.
field for the state of the requests made from applet. This field displays error messages if
drop-down menu, the Attribute to mark
checkbox and define the attribute receiving priority with this ACL
Source Mask Length
field becomes enabled. If
from the drop-down menu.