Motorola WiNG 4.4 Reference Manual page 271

Primary RADIUS Server IP/
Port
Secondary RADIUS Server
IP/Port
Edit
Delete
4.12.1.1 Configuring an Internal Hotspot
Using the Internal
created to collect login credentials through Login.htm, to send them to a RADUIS server, and display a Welcome.htm or a
Faliure.htm depending on the result of the authentication attempt.
NOTE: When using an internal hotspot, ensure that traffic can pass on TCP port 444
between the switch's internal Web server and the hotspot clients.
To create a hotspot maintained by the switch's own internal resources:
1. Select Network
within the Configuration
This is the IP address of the Primary RADIUS server and the port on which the Primary RADIUS
server is listening.
This is the IP address of the Secondary RADIUS server and the port on which the Secondary
RADIUS Server is listening.
Click the Edit button to configure the internal and the external hotspots as well as to configure the
RADIUS Server.
Click the Delete button to delete an enabled hotspot entry.
option means the user develops the hotspot using the internal Web server. The HTML pages are pre-
> Wired Hotspot from the main menu tree. Select an existing hotspot entry from those displayed
tab and click the Edit button. The following screen is displayed.
Network Setup 4 - 167