Table of Contents
Advertisement
6 - 122 WiNG 4.4 Switch System Reference Guide
2. Select the
Beacons Found
3. Refer to the following information as displayed within the
Portal MAC
Rogue AP MAC
Signal Strength
(dBm)
Heard Channel
Heard Time
4. Select the
Clear Report
6.10.4 Reviewing Found Probes
Refer to the
Probes Found
information collected during the AP's channel scan. The information displayed within the Probes Found tab is read-only
with no user configurable parameters.
To view the enhanced beacons table report:
1. Select
Security
tab.
Displays the MAC address of the unadopted AP detected by the enhanced beacon supported AP.
Displays the MAC address of the enhanced beacon supported AP.
Displays the signal strength when the unadopted AP was detected.
Displays the channel frequency when the unadopted AP was detected.
Displays the time when the unadopted AP was detected.
button to clear the statistic counters and begin a new data calculation.
tab to view the enhanced Probe report created by the switch. The table displays probe
>
Enhanced Probe/Beacon Table
Beacons Found
tab.
from the main menu tree.
Advertisement
Table of Contents
Troubleshooting
